GA4 Setup Checker
Short answer
The GA4 Setup Checker is a free self-audit of whether you can rely on your GA4 numbers. You answer 14 yes, no or not-sure questions and get a score out of 100 and a list of likely gaps, biggest first, each with a link to where to read more. It connects to nothing and reads nothing from GA4, and your individual answers are not sent anywhere.
Run the self-check
What the checker looks at
The questions follow GA4 from what it counts to whether you have checked it against anything outside it. Each one has a short note on where to look in GA4. Events and conversions covers whether your key events match a written list of real conversions, whether one submission gives one event, whether a test conversion was seen arriving and whether purchase events carry items, currency, value and a transaction ID. Traffic and sources covers Direct and Unassigned traffic, a documented UTM convention, channel groups that route Meta and Google correctly, a visitor who keeps one identity across other domains and the cookie banner’s consent update. Access and data quality covers who owns the property, whether your own visits are filtered out and whether Google Ads is linked. Checks against reality covers a comparison with your CRM, calls or orders, and a re-check after changes.
How the score is calculated
Each check has a weight of 1, 2 or 3. Checks that decide whether the numbers in GA4 can be trusted at all weigh the most. A “Yes” earns the full weight, “Not sure” earns half, “No” earns nothing. A check marked as not applicable is left out of both sides of the sum.
The checks with weight 3 are core checks: Key events match your written list of real conversions; One submission, one event; The property is yours and you have admin access. A “No” or “Not sure” on any of them keeps the result out of the top band, even when the score is 80 or higher, and the result names the core check to look at first.
The list of gaps is sorted by points lost, biggest first: a “No” loses the full weight of the check, a “Not sure” loses half of it. Checks that lose the same number of points keep the order of the table below.
Score = (sum of weights answered Yes + ½ × sum of weights answered Not sure) ÷ sum of weights of the applicable checks × 100, rounded to a whole number.
| Check | Stage | Weight |
|---|---|---|
| Key events match your written list of real conversions | Events and conversions | 3 |
| One submission, one event | Events and conversions | 3 |
| A test conversion seen arriving | Events and conversions | 2 |
| Purchase carries items, currency, value and a transaction ID | Events and conversions | 2 |
| Direct and Unassigned traffic checked | Traffic and sources | 2 |
| One documented UTM convention | Traffic and sources | 2 |
| Channel groups route Meta and Google correctly | Traffic and sources | 1 |
| The visitor keeps one identity across checkout and booking domains | Traffic and sources | 2 |
| The cookie banner passes consent to Google | Traffic and sources | 1 |
| The property is yours and you have admin access | Access and data quality | 3 |
| Your own visits are filtered out | Access and data quality | 1 |
| Google Ads is linked and imports the events you trust | Access and data quality | 2 |
| GA4 compared with your CRM, calls or orders | Checks against reality | 2 |
| Re-checked after changes and before budget decisions | Checks against reality | 1 |
The checks draw on our GA4 audit guide, our GA4 setup service page and our Consent Mode v2 article. Each gap in your result links to the page it comes from; the pages are also listed under Read more.
Worked example
A business that sells nothing online marks the purchase check as not applicable (“No online sales”), which leaves 25 of the 27 points in play. A test form submission arrives twice in GA4, so “One submission, one event” is No. The agency that set GA4 up left no notes, and nobody on the team can say whether a UTM convention, the Google Ads link and the internal-traffic filter are in place, so those three are Not sure. Everything else is Yes.
Use Not sure only when you really cannot tell. If you know a check is missing, answer No.
- Applicable weight: 27 − 2 = 25
- Lost: 3 + 1 + 1 + 0.5 = 5.5, so earned is 19.5
- Score: 19.5 ÷ 25 × 100 = 78
The list starts with “One submission, one event”, then the UTM convention, the Google Ads link and the internal-traffic filter. “One submission, one event” is a core check, so the result names it as the first thing to look at. The band is 50 to 79.
How to read your result
- 80 to 100
- Solid on paper. The remaining items are tidy-up work. Re-run the check before a budget change and after a site, form or tag change.
- 50 to 79
- Gaps worth fixing. Some numbers in GA4 may be counted twice, credited to the wrong source or never checked. A failed or unconfirmed core check holds you here even with a score of 80 or more. Start with the first item in the list.
- 0 to 49
- Hard to trust. Fix the top items before you change budgets, then run the check again.
These bands are our own cut-offs for deciding what to do next, not a benchmark. The order of the list matters more than the number itself.
What a self-check cannot see
Answers describe what you believe is set up. The checker cannot see the property, so it cannot tell a setting that is defined from one that is active, or an event that arrives on one page and not on another. Two checks are the real test: a conversion you place yourself and watch arrive in GA4, and a comparison of GA4’s lead or order count with your CRM, call log or booking inbox.
The neighbouring checkers cover Google Ads and GA4 as a whole, the Meta Pixel with the Conversions API, and the consent chain. They are listed under Read more.
Read more
Questions about the checker
Does this connect to my Google Analytics account?
No. It asks questions and scores your answers. Nothing is loaded from your GA4 property, Google Tag Manager, Google Ads or your site, so the result is only as good as the answers. Each question has a short note on where to look in GA4: Admin, Realtime, DebugView or Traffic acquisition.
Why does “Not sure” count as half?
An unknown is not a confirmed failure, but it is not a pass either: nobody is watching that check. Half the weight keeps it visible in the score and on your list. Use it only when you really cannot tell. If you know a check is missing, answer No.
Is the score a benchmark against other properties?
No. The weights and the 80 and 50 thresholds are our own definitions, chosen to rank what matters most for whether you can rely on GA4 numbers. They are not drawn from industry data, and the score does not compare you with anyone.
What happens to my answers?
They stay in your browser tab, are not sent anywhere, and disappear when you leave or start over. Our site analytics receives only an aggregate: that the check was started and finished, with the final score, the band and the number of gaps, and the score again if you click the service link. The individual answers are never sent.
Why can a high score still stay in the middle band?
The three checks with weight 3 are: key events match your written list of real conversions, one submission produces one event, and the property belongs to your business with admin access on your side. A No or a Not sure on any of them keeps the result out of the top band, even when the score is 80 or higher, because the rest of the setup cannot make up for numbers you cannot trust at the base. This rule is our own definition, like the weights and thresholds.
Where do the questions come from?
From our published guide “A GA4 Audit You Can Finish in One Afternoon”, from the description of what we set up on our GA4 setup service page, and from our article on Consent Mode v2 and missing GA4 conversions. Where those pages give no fact, the check is worded as an action to carry out, not as a statistic.
What does the GA4 setup service add on top of this?
Our GA4 setup page describes a written audit of the property, with read access to GA4, Tag Manager and Ads, followed by fixes in order of impact. The page lists the audit as free with a written deliverable. A self-check cannot do that: it relies on your answers, not on the property itself.
Can the checker tell me whether my GA4 numbers are correct?
No. It shows where your own answers point to a gap. Only a test conversion you watch arrive, and a comparison of GA4 with your CRM, call log or orders, show whether the numbers match what happened. The checker asks whether you have done both.